GunGame 5 Forums

Before we get flooded with threads about this, yes we know the update broke EventScripts and SPE. As of the writing of this, there is absolutely no timetable as to when things will run as normal again. Please be patient until we can get this all sorted out.

If we could get some solid information from any Linux users out there, it would be helpful. So far, we know that EventScripts will not load on Windows and SPE will crash a Windows server. I would think the same would be true for both on Linux, but if we could get some confirmation, that would be appreciated.

*Edit: Ok, here are the new downloads for both EventScripts and SourcePythonExtensions:
http://forums.eventscripts.com/viewtopi ... 28&t=40765
http://forums.eventscripts.com/viewtopi ... 91#p383891

Thanks,
Satoon

Thank you for all the time and effort you guys put into helping everyone keep their serves running.
Please keep us posted on the new fix

Thanks again

Atech

I'll bet this is really going to screw up your weekend - I'll be sending a small donation your way!

Running gg5.1 on linux, crashes,....... wont restart!
Need new eventscripts, mani also for me!

SK

Mattie has released a new fix for Eventscripts.
Build 370 compiled for OrangeBox. Try these:
•http://oh.ms/es370linux
•http://oh.ms/es370windows

I can confirm the Windows build works.
Just need a fix for SPE now so we can load Gungame51.

EDIT: The SPE fix is here: http://www.mediafire.com/?oqcehp8tc4h1snb

With the above 2 fixes Gungame51 is running without any errors.

UPDATE 6-25-11: Official SPE fix is here: http://forums.eventscripts.com/viewtopic.php?f=125&t=29657

my server wont restart with the one for linux

This is the error that is in my log file



Your server stopped unexpectedly around this time. If you told it to exit in-game, this is nothing to worry about (and you can avoid it in the future by instead using the "map" command); otherwise, the last 10,000 bytes of output from the server, given below, may provide you with clues on what went wrong.


Auto detecting CPU
Using default binary: ./srcds_linux
Enabling debug mode
Running a benchmark to measure system clock frequency...
Finished RDTSC test. To prevent the startup delay from this benchmark, set the environment variable RDTSC_FREQUENCY to 2826.000000 on this system. This value is dependent upon the CPU clock speed and architecture and should be determined separately for each server. The use of this mechanism for timing can be disabled by setting RDTSC_FREQUENCY to 'disabled'.
Using breakpad minidump system
Using breakpad crash handler

Console initialized.
Game.dll loaded for "Counter-Strike: Source"
Setting breakpad minidump AppID = 240
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Installing breakpad exception handler for appid(240)/version(4608)
[SPE]: Handle address is 146001936.
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
[EventScripts] Loading Mattie's EventScripts Beta 2.1.1.370...
Unable to load playerinfomanager, ignoring
[EventScripts] Failure in getting the effects interfaces we need.
Failed to load plugin "addons/mattie_eventscripts"
[EventScripts] shutting down...
[EventScripts] shut down successfully.
Failed to get a pointer on ServerGameDLL.
Failed to load plugin "addons/Tickrate_Enabler"
maxplayers set to 24
Unknown command "r_decal_cullsize"
maxplayers set to 24
Server logging enabled.
Server logging data to file logs/L0624183.log
L 06/24/2011 - 18:00:06: Log file started (file "logs/L0624183.log") (game "/servers/theadultgungame/orangebox/cstrike") (version "4608")
logaddress_delall: no addresses in the list
logaddress_add: 85.214.243.222:33207
maxplayers set to 24
Network: IP 66.150.164.56, mode MP, dedicated Yes, ports 27015 SV / 27005 CL
PreMinidumpCallback: updating dump comment
Uploading dump (in-process) [proxy '']
/tmp/dumps/crash_20110624180006_1.dmp
./exec_theadultgungame.run: line 372: 19896 Segmentation fault (core dumped) $HL_CMD

warning: Can't read pathname for load map: Input/output error.
debug.cmds:5: Error in sourced command file:
No function contains program counter for selected frame.
email debug.log to linux@valvesoftware.com
Fri Jun 24 18:00:06 CDT 2011: Server Quit

Mine dont start either! Linux.

SK

Error Log:

Console initialized.
Game.dll loaded for "Counter-Strike: Source"
Setting breakpad minidump AppID = 240
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Installing breakpad exception handler for appid(240)/version(4608)
[SPE]: Handle address is 135110416.
Could not find platform independent libraries
Could not find platform dependent libraries
Consider setting $PYTHONHOME to [:]
'import site' failed; use -v for traceback
PreMinidumpCallback: updating dump comment
Uploading dump (in-process) [proxy '']
/tmp/dumps/crash_20110624233225_1.dmp
./srcds_run: line 372: 7725 Segmentation fault $HL_CMD
Add "-debug" to the ./srcds_run command line to generate a debug.log to help with solving this problem
Fri Jun 24 23:32:25 GMT 2011: Server restart in 10 seconds

Is the spe fix for windows or linux.

My windows server still does not start with the above fixes.

my scrim server restarts with the windows es and not sure about the linux but make sure you update your sourcemod and metamod other wise it wont work

Also, if you use Mani remember to move the 4 mani_admin files from the addons folder to a temp folder until they release a fix. Right now those files will prevent your server fron starting.

let me try that

atech wrote:Is the spe fix for windows or linux.

My windows server still does not start with the above fixes.

windows + linux i486

I'm not sure where that update came from, but it definitely isn't official by any means. I was able to start my Windows server, and it showed SPE was loaded, but then GunGame51 failed to load. That might be a signature issue, but it would be better if we wait for an official update from your-name-here.

If it works for you, congrats, otherwise, please just continue to be patient.

Thanks,
Satoon

Great Thanks for the fix, it Works fine for me (Window server)... Only had to remove mani plugin for now until they come up with a new fix...

satoon101 wrote: it would be better if we wait for an official update from your-name-here.

If it works for you, congrats, otherwise, please just continue to be patient.

Thanks,
Satoon

Yes we will need an official update. This is only the binaries compiled against the newest alliedmods hl2sdk-ob-valve. But in the meantime it works.

It works however when ever anyone levels up they throw there gun and dont get the next gun.


However if they knife someone they get the next gun. In a nut shell..

level 1 - Glock
level 2 - Usp
level 3 - p228

You kill someone with glock go to usp however you only have a knife. If you then knife someone you go to p228 and receive the gun. If you die before getting a knife you receive the usp.



Alot of error logs http://forums.gungame.net/viewtopic.php?f=76&t=1892

Thank you for the quick reply's.
After removing the mani admin files I was able to start the server and connect.

I will still be looking for the official update.

Thanks again. Ill check back tomorrow to see how things are going.

Atech

I'm not getting any of those errors. In fact no errors. And my servers are full tonight.

Well, after trying to load GunGame51 several times, it finally loaded and worked perfectly fine.

wtfaatp wrote:It works however when ever anyone levels up they throw there gun and dont get the next gun.


However if they knife someone they get the next gun. In a nut shell..

level 1 - Glock
level 2 - Usp
level 3 - p228

You kill someone with glock go to usp however you only have a knife. If you then knife someone you go to p228 and receive the gun. If you die before getting a knife you receive the usp.



Alot of error logs http://forums.gungame.net/viewtopic.php?f=76&t=1892

Strange error. Turbo worked fine for me. Maybe that is just a Linux issue.

Satoon